How to Build Basement Storage Shelves

  • Peter Selby
  • Tagged , ,
  • July 26, 2015
  • Knowing how to construct basement storage racks will conserve you cash and offer storage you never knew existed. Although basements are typically haphazardly filled with vacation decors, and devices, these items can all be neatly stacked on durable racks. Doing so produce a less messy, more arranged basement and does not cost much.

    Wood Shelving

    Basement storage racks been available in many sizes, varieties, and shapes, none which might work for a particular basement. The option, in such a case, is to construct your very own. Storage racks likewise are available in numerous materials, such as plastic, metal, and inexpensive wood. These structures may not be adjustable and will certainly cost more than constructing wooden shelves to match a particular function and place.

    Several sheets of.75-inch construction-grade plywood will be enough to provide shelving for a whole basement wall. You most likely won’t need more than 3 sheets. Shelves can be set up between existing 2×4-inch boards, however additional lumber will certainly be had to support them.

    How to Build Basement Storage Shelves
    How to Build Basement Storage Shelves

    Step 1 – Construct the Shelves

    Take your very first sheet of plywood and eliminate 3 racks, each being 12-inches deep. Develop cleats to attach to the studs and rest the racks on them. These cleats must be 12-inches large to support the rack. They need to be 6-inches tall where they are connected to the 2×4-inch boards, and 2-inches where they meet under the edge of the rack. The range in between conventional studs in a basement is around 16-inches, however you may have to make modifications if that is not the case.

    Procedure from the floor to the point where you want to install the first shelf. Mark the 2×4-inch board on each side. Apply woodworker’s glue to the stud and the mounting cleat. Hold the supporting cleat in place and screw in 3 8×2-inch screws to attach the cleat to the stud. Do so on all of the studs holding the very first shelf.

    Step 2-feet from the top of this shelf to the bottom of the next shelf and repeat the procedure for mounting the cleats and setting the shelf on top of them. Lastly, put the shelf on the cleats. Thoroughly mark lines where the stud fulfills the rack, and cut notches for the shelf to fit in between the studs. Connecting the shelves to the cleats is optional.

    Step 3 – Finishing the Shelves

    Although construction-grade plywood is suggested for this task, you can also use a top quality piece of plywood and complete it with either stain and varnish or repaint. Whatever alternative you pick, the plywood will certainly withstand stains and dirt if it is dealt with.

    Begin by sanding the edges and surfaces with 100-grit sandpaper. Finish sanding with 220-grit paper and wipe the wood with a fabric dipped in mineral spirits. Next off, use a stain or a half-and-half coat of varnish and mineral spirits. Let it dry extensively and re-sand your racks very lightly with 220-grit sandpaper. Wipe it once more, then apply a thin coat of 100 % varnish. Give the varnish to dry.