Drifting wall shelves attach to the wall by methods of hidden supports, instead of the more conventional brackets or hangers, and offer an attractive feature for any room which needs shelving. They look streamlined smooth and are simpler to put in tight corners than their conventional equivalents. Fitting these racks is easy once you understand the key to setting up the covert cleats.
Step 1 – Check the Wall
Find the area of the studs in the wall prior to you start making holes. Utilize a stud finder to find these; mark them plainly. The rack has to be supported by the studs, so work out the length of the rack and mark that in the offered spaces between the studs. You need to now have a clear idea of where you desire your floating wall shelves to be located.
Step 2 – Make the Shelves
Each rack is in fact a long, flat 5-sided box. Utilizing your saw, cut 2 pieces of plywood to the right length. These are the leading and bottom of the shelf. Cut another strip of plywood 1 inch large and the length of the shelves. This is the front of the shelf. Cut 2 strips 1 inch broad and 1/4-inch less than the depth of the rack. These are the sides. Sand them down thoroughly. Drill pilot holes so the wood doesn’t divided, then glue and screw the boxes together.
Step 3 – Finish the Shelves
You want to do this prior to you hang them so you can easily deal with them without having to prevent getting paint or stain on the wall. Sand the racks down and varnish them, or you may add a layer of paint to the wood before the varnish. You can repaint the whole system one color to match the design of the space, or you might repaint various racks different colors if you desire something more attractive.
Step 4 – Build and Hang the Bracket
The bracket connects to the wall and will certainly be the sixth side of the box. Cut a piece of 1×1 to the length of the open end of the rack. This is the ledger board that holds the shelf to the wall. Set the ledger against the wall where you marked the studs. Make use of a level making sure it is even. Drill pilot holes in the ledger and after that screw it through the wall and into the studs.
Step 5 – Mount the Shelves
Put some adhesive onto the back of the rack and around the ledger board. Push the rack onto the ledger board, concealing the ledger inside the box of the rack. Drill pilot holes through the shelf into the ledger board and after that screw it in location. Leave the glue to dry.
Examine that the drifting wall shelves are firmly sealed before you put anything important upon them.
This is one of the more simple tasks that you can take on yourself, but if you need to hire a handyman, and you’re in the Fort Myers area, then head on over to http://www.homeservicesfortmyers.com to find a reliable, and licensed craftsman.