How to Install a Tile Shower Shelf

  • Peter Selby
  • Tagged , ,
  • July 24, 2015
  • Although some people choose to hire a plumbing contractor to do all the work of a bathroom remodel, we always suggest using a tiling company to give you the most professional job and a more professional finish. Of course there are some who have the know-all and experience to do this themselves. So if you are one of those people, here are a few easy steps to follow to be able to install a tile shower shelf.

    Installing a shower tile rack is a fantastic way to add racks to the shower room without needing to purchase or develop brand-new bathroom shelves. These racks are not only functional and ornamental; they conserve a great deal of space too. The most convenient method to set up a shower tile shelf is to set up diagonally cut tiles in the corners. Corner tile shelves are a lot easier to install due to the fact that they do not need cutting a hole in the wall. Follow these steps to set up a shower tile rack.

    Step 1 – Preparation

    It is advised that 12-inch tiles be made use of for shelving. The shower tile shelf has to be strong and steady in order to hold any restroom stuff firmly without breaking. Thinner and smaller tiles might not provide the very best strength for the job, so ensure to utilize the advised size.

    Plan where to install the shower tile shelf prior to the tiling project. Figure out at what height it is to be set up. It can be installed after the very first row of tiles is set, or after 2 rows are set in place. Determine whether additional shelves are to be set up.

    Step 2 – Cutting the Tiles

    Create a design template for the tile rack from cardboard. The tile shelf can be cut diagonally to form a triangle or cut in a round manner to form a quarter-circle shape. Use the cardboard design template as a guide to cut the shelf using a tile cutter.

    To guarantee that the tiles and the rack are anchored to the wall securely, use thinset as an adhesive. Install the very first set of tiles first at the bottom of the wall horizontally and add another row if required. To anchor the shelf to the wall, add an adequate amount of thinset on the edges of the rack using a trowel. Thoroughly place the shelf in the preferred corner. Guarantee that the rear edges make complete contact with the walls. Somewhat slope the shelf to the ground in order to prevent water from occupying the surface area after installation.

    Make use of a finger to smooth the thinset that oozes out of the sides of the rack. Then use a damp sponge to clean the surface of the shelf prior to installing the next set of tiles.

    Step 4 – Finishing Touches

    Set up the next set of tiles above the rack to sandwich the shelf in place. Add more shelves to the leading corners if desired in the same manner. Grout around the shelves and permit the mortar to dry.

    Of course, if you find these instructions to difficult to follow, and would prefer to hire a professional plumber in Fort Myers to do this, then this could potentially be the best option for you!